19
DIN48 SIZE ANALOG
MULTIRANGE POWER
OFF-DELAY TIMERS
PM4H-F
FEATURES
•
Switch operation times between three types of time ranges of 1 s to 10 s and 1
min to 10 min.
•
Instantaneous reset available.
•
The shorter body makes it easier to use.
48
1.890
48
1.890
62.5
2.461
mm
inch
CHARACTERISTICS
PM4H-F8
Type
Item
PM4H-F8R
100 to 120V AC, 200 to 240V AC, 24V AC, 24V DC, 12V DC
Rated operating voltage
50/60Hz common (AC operating type)
3A 250V AC (resistive load)
Power OFF-delay
Power OFF-delay (with reset)
Rated frequency
Output rating
1s to 10s: 3 range switchable 1 min to 10 min: 3 range selectable
±
0.3%
±
5% (Full-scale value)
±
0.5% (at the operating voltage changes between 85 to 110%)
Max. 100m
Ω
(at 1A 6V DC)
±
2% (at 20
°
C ambient temp. at the range of –10 to +50
°
C
+14 to +122
°
F
)
Time range
Operation time fluctuation
10
7
10
5
(at rated control capacity)
Mechanical (contact)
Electrical (contact)
85 to 110% of rated operating voltage (at 20
°
C coil temp.), 90 to 110% (DC Type)
Allowable operating voltage range
–10 to +50
°
C
+14 to +122
°
F
Ambient temperature
Max. 85%RH
Ambient humidity
860 to 1,060hPa
Atmospheric pressure
20%
Ripple factor (DC type)
IP65 on front panel (using rubber gasket ATC18002) <only for IP65 type>
Protective construction
100g
3.527 oz
(Pin type)
110g
3.880 oz
(Screw terminal type)
Weight
Min. 98m/s
2
(4 times on 3 axes)
Shock resistance
Min. 980m/s
2
(5 times on 3 axes)
10 to 55Hz: 1 cycle/min double amplitude of 0.5mm (10min on 3 axes)
Vibration resistance
10 to 55Hz: 1 cycle/min double amplitude of 0.75mm (1hr on 3 axes)
Functional
Destructive
Functional
Destructive
Between live and dead metal parts
Between input and output
Between contacts of different poles *3
Between contacts of same pole
Insulation resistance (Initial value)
1,500Vrms for 1 min Between live and dead metal parts
1,500Vrms for 1 min Between input and output
1,000Vrms for 1 min Between contacts of different poles *3
750Vrms for 1 min Between contacts of same pole
Breakdown voltage (Initial value)
Setting error
Voltage error
Contact resistance (Initial value)
50ms
Min. reset time
s range type: 100ms
min range type: 2s
Min. power supply width
55
°
C
131
°
F
Max. temperature rise
Au flash on Silver alloy
Contact material
Temperature error
Timed-out 1 Form C
Timed-out 2 Form C
Timed-out 2 Form C
Contact arrangement
Operation mode
Approx. 5VA (AC type)
Approx. 2W (DC type)
Rated power consumption
Rating
Time
accuracy *1
Contact
Life
Electrical
function
Mechanical
function
Operating
condition
Others
PM4H-F11R
Min. 100M
Ω
(At 500V DC)
*Notes: 1) Unless otherwise specified, the measurement conditions at the maximum scale time standard are specified to be the rated operating voltage (within 5% ripple
factor for DC), 20°C
68°F
ambient temperature.
2) For the 1s range, the tolerance for each specification becomes ±10ms. When the power goes on, in rush current (0.3A) flows. Cautions should be taken. The
minimum power supplying time after forced reset input is 2s or more.
3) Between contacts of different pools for F8, F11R types only.
UL File No.: E122222
CSA File No.: LR39291
PM4H-F
02/2003
