Panasonic PanaXSeries MN1030 Series Скачать руководство пользователя страница 154

Страница: 154 / 340

Chapter 8 Writing Source Statements

142 Expressions

8.7.4

Expression Attributes

When expression operands are connected by an operator, the calculated result of the expression will

have attributes of the operands and the operator.

The most important attributes for expression evaluation are as follows.

•

Undefined (undefined-UND)

•

Absolute (absolute-ABS)

•

External (external-EXT)

•

Relative (relocate-REL)

Operation result attributes

The operation result attributes for the label itself or the labels are following four.

•

UND: undefined attributes

The label is undefined at the reference.

•

ABS: absolute attributes

The label is undefined with equ pseudo instruction. The value is not changed. The constant

value written directly will be regarded as an absolute attribute.

•

REL: relative attributes

The label is already defined in the same file at the reference (the label referring forward).

•

EXT: external reference attributes

The label is declared with global pseudo instruction and defined by another file.

The rules for connecting attributes are as follows.

For ~, +, – (unary) operators

Attribute of Operand

Attribute of Result

UND

ABS

REL

EXT

Содержание PanaXSeries MN1030 Series





















































































































































































































































































































































Результаты поиска

Содержание PanaXSeries MN1030 Series

Отзывы:

Похожие инструкции для PanaXSeries MN1030 Series

Бренды по названию

Популярные бренды

Panasonic PanaXSeries MN1030 Series, Руководство пользователя

Результаты поиска

Содержание PanaXSeries MN1030 Series

Отзывы:

Похожие инструкции для PanaXSeries MN1030 Series

Бренды по названию

Популярные бренды