Panasonic PanaXSeries MN1030 Series Скачать руководство пользователя страница 267

Страница: 267 / 340

Chapter 13 Error Messages

Assembler Errors 255

2314

Illegal section name.

There is an error in a section name.

Check the spelling of the section name.

2315

Operand error.

An operand of the wrong type is used.

Check the number and types of operands.

2316

Illegal operand expression.

An operand expression does not evaluate to a value within the specified range.

Check the operand expression.

2317

Too many operands.

An operand of the wrong type is used.

Check the number and types of operands,

2318

Illegal operand value.

An operand has a value that is not within the specified range.

Check the operand value to place it within the specified range.

2319

Operand type should be absolute.

An operand does not have an absolute value.

Specify an absolute value for the operand.

2320

Debug operand error.

The assembler and the C compiler have different version numbers.

Check that the assembler and C compiler are the most recent versions.

2321

Illegal location counter.

The location counter value for an org direction has an illegal value.

Change the location counter value for the org directive.

2322

Operand not need.

There is a superfluous operand.

Eliminate the superfluous operand.

2323

Include file cannot read.

There is a mistake in the file name specification.

Check the file name specification.

2324

Too many “#else”.

There are too many #else.

Check the #else specification.

2325

Too many “#if” or “#endif”.

The #if and #endif are not balanced.

Check the #if and #endif.

2326

Missing endm.

A macro statement is missing its closing endm.

Check all macro and endm statements.

2327

Macro symbol is used recursively.

A macro is defined recursively.

Check the macro definitions.

Содержание PanaXSeries MN1030 Series





















































































































































































































































































































































Результаты поиска

Содержание PanaXSeries MN1030 Series

Отзывы:

Похожие инструкции для PanaXSeries MN1030 Series

Бренды по названию

Популярные бренды

Panasonic PanaXSeries MN1030 Series, Руководство пользователя

Результаты поиска

Содержание PanaXSeries MN1030 Series

Отзывы:

Похожие инструкции для PanaXSeries MN1030 Series

Бренды по названию

Популярные бренды