Panasonic Panafax UF-744, Руководство пользователя

Страница: 48 / 169

44
Sending Documents
You can choose either Memory or Direct Transmission.
Use Memory Transmission if:
•
You want to send the document to multiple stations.
•
You have to retrieve the document immediately.
Use Direct Transmission if:
•
The memory is full.
•
You want to send the document after talking with the other party.
Memory Transmission
Your machine quickly stores the document into the machine’s memory.
Then, starts to dial the telephone number.
If the transmission fails, your machine will re-transmit the remaining unsuccessful page(s) automatically.
Transmit Receive
A
A
Store document
in memory
A
Panafax
Panafax
Panafax
1. The File Number of the document being stored is shown at the upper
right corner of the display while storing the document. It is also printed
on the Communication Journal (COMM. JOURNAL), 32 Transaction
Journal and File List. The percentage of memory used is shown on the
lower right corner of the display after each page is stored.
2. If a memory overflow occurs while storing documents into memory, the
machine will prompt on the display, whether to start transmitting those
pages which are successfully stored or to cancel the transmission.
Press
1
to cancel; press
2
to transmit. See Specifications, page
146 for the image memory capacity.
If no action is taken within 5 seconds, the machine will start transmitting
the stored pages.
3. An Information Code will be displayed if the transmission has failed or
no answer at the receiving side after the last automatic redial. The
document stored for this transmission will be erased from the memory
automatically and the transmission is marked ”INC” (incomplete) on
the Communication Journal (COMM. JOURNAL).
If you need to retain the incomplete documents even after the last
redial, change Fax Parameter No. 31 (INC. FILE SAVE) to Valid in
advance.(see page 36) To retry the incomplete documents, refer to
page 81.
4. When a power failure occurs,
[ UF-788]
The document information stored in memory will be saved for up to 1 hour, when the battery is fully charged.
[ UF-744]
The document information stored in memory will be lost. A Power Failure Report will be printed
automatically after the power is restored.
The report will not be printed if there were no documents in the memory. (see page 129)
Note:
* STORE * NO.003
PAGES=02 10%
* STORE * COMPLETED
TOTAL PAGES=05 30%
MEMORY OVERFLOW
INFO. CODE=870
015 PAGES COMPLETED
DELETE? 1:YES 2:NO
INCOMPLETE
INFO. CODE=XXX