Panasonic Panafax UF-4000, Руководство по обслуживанию

Страница: 117 / 284

117
601 XMT ADF Door was opened during ADF
transmission.
623 XMT A No original was in the ADF. (Built-
in dialer engaged) Operator removed the original from the
ADF after dialing was completed.
Original was not set properly in the ADF.
630 XMT or RCV
(Polling)
B Redial count over. No dial tone detected. Sensor dial tone
is not detected. (desitination dependent)
Busy tone is detected. (desitination
dependent) T1 timer (35±5 sec.)
elapsed without a signal from the
receiver.
631 XMT A "STOP" button was pressed during
Auto Dialing.
634 XMT Redial count over with no response
or busy tone was not detected.
Note:
U.S.A. and Canadian models
will redial only once if a busy
tone is not detected.
Line Cable unplugged.
Wrong number.
SC PCB is abnormal
638 XMT Power turned off with applicable
data in memory or during
communication. Power switched off. Power failure
occurred.
741 XMT, Polling Unable to dial Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
800 Relay
Comm.
The machine was requested to
relay a document but has no Relay
Hub capability.
816 Conf. Polled "The received Polling Password
did not match. The machine does
not have Confidential Comm.
capability."
870 MEM XMT
Multi-Copy
Memory overflow occurred while
storing documents into memory.
880 - - File Access Error.
884 - - File Access Error.
887 - - Power Failure.
Fax Information Codes
Code Mode Phase Description of Problem Cause