PAN9420 Quick Start Guide
Quick Start Guide Rev. 1.0
Page 20
Using the WIFIgurator you will be able to
Issue commands and see the response
Easily and using the GUI, set major key features
Convert your HTML code to a firmware update file (.fwu)
Load the firmware onto the module
4.2.3 Wireless
– Connecting through Wi-Fi
To connect to the PAN9420 through Wi-Fi, all you need to do, is to apply power to the
Evaluation Kit (see
3.3 Powering the Evaluation Kit
Once the board is powered and initialized, activate the
WLAN Network Manager
on your PC or
Smart Device.
In Windows based machines, it is mostly on the bottom right corner of the screen.
Your device will scan for new wireless Access Points (APs):
Look for the SSID
PAN9420_AP
.
Connect to
PAN9420_AP
.
The standard connection is protected with a WPA2 key. When prompted to enter a
password, please enter the default password:
PAN_9420
.
Figure 14: Wi-Fi connection
