PAN9420 Quick Start Guide
Quick Start Guide Rev. 1.0
Page 12
3.3.2 Proper Jumpers Setup
Prior to applying power to the evaluation kit, please make sure that all the
jumpers on the Motherboard are set properly.
In the picture below (circled in Red) are all related jumpers.
Figure 5: MB Jumpers Location
Please refer to Figure 5 above, as well to the pictures provided below.
Powering the kit using USB0:
JP4
Pin 1 connected to Pin 2
JP6
Pin 1 connected to Pin 2
JP7
connected
Powering the kit using X2 and X3:
JP4
Pin 2 connected to Pin 3
JP6
Pin 1 connected to Pin 2
JP7
connected
