Installation/Troubleshooting
30
5.
When the Single Camera page is displayed, the setup is completed.
•
If Security Warning window is displayed, click [Yes] (see page 33).
Notes
•
See page 16 of the Operating Instructions on the Setup CD-ROM for the
Single Camera page.
•
If you enable Internet access to the camera, follow the procedures below.
•
When you are using a router supporting UPnP
TM
•
When you are using a router not supporting UPnP
TM
Follow the procedures shown on page 27.
1. Enable the Auto Port Forwarding feature on the UPnP page (see
page 58 of the Operating Instructions on the Setup CD-ROM).
2. Register with the Viewnetcam.com service on the Viewnetcam.com
page (see page 60 of the Operating Instructions on the Setup CD-
ROM).
3. Confirm the Internet access to the camera (see page 31).