![background image](http://html1.mh-extra.com/html/panasonic/onehome-bb-hcm331a/onehome-bb-hcm331a_installation-troubleshooting-manual_4184409017.webp)
Installation/Troubleshooting
17
[For assistance, please call: 1-800-272-7033]
3.
Select the camera to set up and click [Execute].
•
This program searches for the cameras that are connected to the router
and displays the MAC Addresses, IP addresses and Port Numbers.
•
The MAC Address on the rear side (see page 13) of the camera shows
which camera you select on the Camera List window.
Notes
•
If more than 20 minutes have passed since the camera was turned on, the
camera cannot be set up from the Setup Program. In this situation,
disconnect the AC cord from the outlet, and reconnect it again.
•
The Setup Program may not list any cameras due to your firewall or
antivirus software settings on your PC. If you cannot disable your firewall
or antivirus software, you can set up the camera entering the camera MAC
address on the following window. The camera's MAC address can be
found on the label affixed to the back of each camera. See page 28 for
details.
Camera
Status
Camera
List window
Displays IPv4 or
IPv6 information.
Port
No.
MAC
Address
IP
Address