Installation/Troubleshooting
27
[For assistance, please call: 1-800-272-7033]
1.8
Connecting the Camera to a Router
Supporting UPnP™ (IPv4 Only)
To allow access from the Internet with a router supporting UPnP
TM
, follow the
procedures shown on page 21.
Notes
•
In some routers, the UPnP
TM
feature is disabled by default. Enable your
router's UPnP
TM
feature following the router manual before you set up the
camera. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/technic/rtr_setup/ for
details.
•
If the maximum idle time is set in PPPoE or PPTP connection with your
ISP, disable it on the router. See the router manual for details.