Panasonic Omnivision PV-V4622 Скачать руководство пользователя

Страница: 14 / 44

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

Playback a Tape

Rapid Rewind/ Fast Forward

(E.g., T-120 tape rewinds in approx. 1 minute.)

Press REW

in Stop mode.

Remove loose or
peeling labels from tapes

to prevent tape jam.

Insert a tape,

•

VCR power comes on. “VCR” lights on Multi
Function Display. If Auto VCR/TV (p. 35) is
set to “OFF,” press VCR/TV until “VCR”
lights on the Multi Function Display.

Press PLAY

to play tape.

• If tape has no rec. tab (p. 4), auto play begins.

Special Features During Play

Press STOP

to stop tape.

• These features work best in SP or SLP mode.
• The sound will be muted.
• To reduce picture noise, see “Manual Tracking

Control” on page 37.

• After the VCR is in Still or Slow mode for 3 minutes,

it will switch to Stop mode automatically to protect
the tape and the video head.

PAUSE/
SLOW

REW

STOP

EJECT

Multi Function Display

Insert a tape.

Playback using VCR controls

Press PLAY.

Press STOP/EJECT to stop and/
or eject tape.

PLAY

Ready Checklist

All connections are made (p. 8, 10, 24).
TV and VCR are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.

Remote is in VCR mode. (Press VCR)

Forward/ Reverse scene search

➛

Press FF

REW

➛

Press PLAY

to release.

After search has begun, each additional press
of

REW

changes speed as shown below.

[SLP] : Approx. 21X

↔

Approx. 43X

[LP]

: Approx. 9X

↔

Approx. 15X

[SP]

: Approx. 7X

↔

Approx. 13X

• If picture is interrupted at 43X, 15X, or 13X

speed, speed changes to 21X, 9X, or 7X.

• It may take a moment for 43X, 15X, or 13X search

to start while tape condition is being determined.

• 43X, 15X, or 13X search may not be possible

with some tapes.

• Picture interruption may occur with some TVs.
• FF and REW search speed may vary depending

on current tape position.

Press EJECT on remote,
or STOP/EJECT on VCR

to eject tape.

Note

Notes

• Rewind or FF starts after VCR detects tape

length. This may take a moment.

• Rew/ FF speed slows down at start and end

portions of the tape.

Still (Freeze) picture

➛

Press PAUSE/SLOW

➛

Press PLAY

to release.

Frame by Frame picture

➛

Press PAUSE/SLOW

in Still mode.

➛

Press PLAY

to release.

Slow Motion picture

➛

Hold down PAUSE/SLOW

in Still mode.

➛

Press PLAY

to release.

V4622 P1-21 (2nd) [LSQT0509B].p65

2002/05/23, 18:28

Содержание Omnivision PV-V4622













































Результаты поиска

Содержание Omnivision PV-V4622

Отзывы:

Похожие инструкции для Omnivision PV-V4622

Бренды по названию

Популярные бренды

Panasonic Omnivision PV-V4622, Руководство по эксплуатации

Результаты поиска

Содержание Omnivision PV-V4622

Отзывы:

Похожие инструкции для Omnivision PV-V4622

Бренды по названию

Популярные бренды