38
AV-Enhancer:
Automatically optimises and adapts the audio and video settings to the disc used.
The Picture and Audio menus are not available when this function is enabled.
Repeat:
Allows you to repeat the current track or chapter.
A-B Repeat:
Playback repeats a defined section between positions A and B of a title.
Press
ENTER
to set starting point A and end point B. If you do not set point B, the end of the track
is used as the end point. Press
ENTER
to terminate this function.
Marker:
Up to 5 positions can be tagged pressing
ENTER
. Press
CANCEL/RESET
to delete any mistakes.
Select a marker and press
ENTER
. Playback starts at the marker tag.
The markers are cleared by opening the disc tray or switching off the appliance.
Advanced Disc Review:
For a fast review of the disc.
Play Speed:
Select a factor by which to change the playback speed.
The audio output switches to PCM (2-channel).
Other Settings
Play Speed
AV Enhancer Off
Play Menu
Picture Menu
Audio Menu
Display Menu
Other Menu
x1.4
x1.3
x1.2
x1.1
x0.9
x0.8
x0.7
x0.6
Normal
Off
On
Play Menu
AV Enhancer Off
Repeat Off
A-B Repeat * *
Marker
Advanced Disc Review
Picture Menu
These settings are not available
for every disc.
Functions menu
Picture Mode:
Changes the image display settings
INPUT
REPEAT
AV
ENHANCER
Normal:
Factory
default
Cinema2:
Enhances brighter areas
Cinema1:
Cinema function for viewing in dark
of dark scenes.
rooms. Bright picture areas are dimmed
Animation:
Intensifies the colours.
down.
Dynamic:
Brightens up the picture.
Picture Mode
Normal
Video Output Mode 625p
Transfer Mode Auto
40
40
36
Transfer Mode:
For a PAL output signal
For an NTSC output signal
Auto
: Movies with 25 frames per second are recognized
Auto1
(normal): Movies with 24 frames per second are
and appropriately converted.
recognized and appropriately converted.
Video
: Select this option if the video is distorted with the
Auto2
: Suitable for movies with 30 frames per second in
[Auto] option.
addition to movies with 24 frames per second.
Video
: Select this option if the video is distorted with the
[Auto1] and [Auto2] options.
Video Output Mode:
To switch to progressive output of the COMPONENT VIDEO OUT connection, e.g.
to connect a plasma screen, select [625p].
RGB mode must be turned off for you to use this function.
D
The Picture Menu functions are not available when the AV-Enhancer function is turned on.
If the television picture does not display correctly with this setting [625p], press
CANCEL/RESET
for approx. 6 seconds
to reset the selection.
