Record mode
22
LSQT1131
ª
On-screen display in the tape
recording mode
1) Recording time elapse
2) Remaining tape indication
ª
Concerning the remaining tape time
indication on the screen
≥
The remaining tape time is indicated in minutes.
(When it reaches less than 3 minutes, the
indication starts flashing.)
≥
During a 15 seconds or shorter recording, the
remaining tape time indication may not be
displayed or the remaining tape time may not be
displayed correctly.
≥
In some cases, the remaining tape time
indication may display remaining tape time that
is 2 to 3 minutes shorter than the actual
remaining tape time.
Recording check
The last image recorded is played back for 2 to
3 seconds. After checking, the camera will be set
to a recording pause.
≥
Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
1
appears.
2
Move the joystick left to select the
recording check icon [
].
≥
The [RECORDING CHECK STARTED]
indication appears on the screen of the movie
camera.
Blank search function
Searches for the last part of the image recorded
(unused part of the tape). After the search is
finished, the blank search function is cancelled
and the camera is put into recording pause.
≥
Set to Tape Recording Mode.
1
Press the joystick to display the icon during
the recording pause. Move the joystick
down until icon
1
appears.
2
Move the joystick right to select the blank
search icon [
].
3
When the confirmation message appears,
select [YES] and press the centre of the
joystick.
ª
Stopping blank search midway
through
Move the joystick down to select the [
∫
] icon.
≥
If the cassette tape has no blank part, then the
camera will stop at the end of the tape.
≥
The camera stops at a point approx. 1 second
before the end of the last image recorded.
When you start recording at that point, the
image can be recorded seamlessly from the last
image.
0h00m10s00f
0h00m10s00f
0h00m10s00f
1)
R 0:30
R 0:30
R 0:30
2)
1
1
LSQT1131_ENG.book 22 ページ ２００７年１月１１日 木曜日 午前９時５分
