Panasonic NV-GS40, Руководство по эксплуатации

Страница: 55 / 76

Others
-55-
ª
Progressive Photoshot Function
≥
The still pictures are recorded at a slightly
rewound point from where you press the
[PHOTO SHOT] Button.
≥
When you change to the Still Picture Mode, you
will hear a click. This is the sound of the iris
closing and not an indication of malfunction.
≥
If you record still pictures in Progressive
Photoshot Mode when your Movie Camera is
set to Programme AE (
-24-
), the brightness of
the images may change.
≥
Using the Night View Functions cancels the
Progressive Photoshot Function.
About [PROGRESSIVE] Setup
≥
When the [
æ
] Indication is displayed, you can
use the Progressive Photoshot Function.
When [PROGRESSIVE] is [ON]:
You can use the Progressive Photoshot Function
at any time. In this case, however, the following
functions are disabled.
≥
Digital Effect Modes in [EFFECT1]
-27-
≥
Digital Zoom [D.ZOOM]
-21-
≥
1/750 s or faster shutter speed
-25-
When [PROGRESSIVE] is set to [AUTO]
You cannot use the Progressive Photoshot
Function in the following cases.
≥
When the zoom magnification is approximately
10
k
or higher
≥
When the shutter speed is 1/750 s or faster
≥
When [EFFECT1] is set to [WIPE], [MIX],
[STROBE], [GAIN UP], [TRAIL], [MOSAIC],
[MIRROR]
≥
When the pictures are displayed on a Multi
screen
ª
Self-timer Recording
≥
When [BEEP SOUND] on the
[OTHER FUNCTIONS1] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu is set to
[ON], the beep sound will be emitted along with
the Recording Lamp flashing in the Self-timer
Standby Mode.
≥
By operating the [OFF/ON/MODE] Switch, the
Self-timer Standby Mode is cancelled.
ª
Zoom In/Out Functions
≥
When you are zooming on a faraway subject, a
sharper focus is achieved if the recording
subject is 1.2 metres or more away from the
Movie Camera.
ª
Zoom Microphone Function
≥
The Zoom Microphone Function may not work
effectively if the surrounding noise is too loud.
≥
It does not work with an external microphone.
ª
Digital Zoom Functions
≥
As the magnification of digital zoom increases,
the quality of image may deteriorate.
≥
White balance cannot be set in the digital zoom
range.
ª
Image Stabilizer Function
≥
The Image Stabilizer Function does not operate
in a dimly lit place. In this case, the [
[
]
Indication flashes.
≥
Under fluorescent lighting, image brightness
may change or colours may not look natural.
≥
After-images may appear.
≥
When a tripod is used, it is recommended that
you turn the Image Stabilizer off.
≥
Within the digital zoom range, or when
recording with a conversion lens attached, the
Image Stabilizer Function may not work
effectively.
ª
Backlight Compensation Function
≥
When setting the Iris manually, the Backlight
Compensation Function does not work.
≥
By operating the [OFF/ON/MODE] Switch, the
Backlight Compensation Function is cancelled.
ª
Night View Functions
≥
In a bright place, such as the outdoors, the
recorded picture may become whitish.
≥
In a dark place, the recorded picture is
presented in a time-lapse-like manner.
≥
Adjust the Focus manually.
≥
The Progressive Photoshot Function is
automatically turned off.
≥
The Continuous Photoshot Function cannot be
used.
≥
White Balance cannot be set.
≥
The shutter speed cannot be adjusted.
≥
The Image Stabilizer, Programme AE or Digital
Effect Modes in [EFFECT1] cannot be set.
≥
When recording with the Night View Function, it
is recommended to use the tripod.
≥
The Night View Function makes the signal
charging time of CCD longer up to 25 times than
usual, so that the dark scenes that are invisible
for naked eyes can be recorded brightly. For
this reason, a bright dots may be seen, but this
is not a malfunction.
ª
Wind Noise Reduction Function
≥
It does not work with the microphone on the
Free Style Remote Controller with Mic nor an
external microphone.
≥
When it is set to [ON], directivity of microphone
is regulated depending on the strength of wind
to reduce wind noise.
50B-ENG.book 55 ページ ２００３年１月１７日 金曜日 午後５時２９分