Panasonic NV-GS40, Руководство по эксплуатации

Страница: 52 / 76

Others
-52-
N (F, E): Card Photoshot Picture Quality
(during Card Photoshot
recording)
[F] means Fine, [N] means
Normal and [E] means Economy.
-39-
, , : MPEG4 Picture Quality
-41-
ACCESS: While Card is being read (during
Playback, Formatting and
Multi-Picture Function use).
-38-
0: Remaining Number of Card
Photoshot pictures
-39-
R:0h00m: Remaining time of MPEG4 or
Voice data
H, L: Card Continuous Photoshot
Recording
-39-
: Lock Setting
-47-
¥
(White): DPOF Setting completed (set to
1 or more picture)
-46-
¥
(Green): Slide Show Settings completed
-44-
¥
(Blue): DPOF Setting (set to 1 or more
picture)/Slide Show Settings both
completed
-44-
,
-46-
: [640
k
480] Image size
≥
For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
: 640 or more, less than 800 (The
size is not displayed at under
640 pixels.)
: 800 or more, less than 1024
: 1024 or more, less than 1280
: 1280 or more, less than 1600
: 1600 or more, less than 2048
: 2048 or more
(Cyan): Card Photoshot Mode
(Red): While Card Photoshot recording
is activated
(Red): No Card (Still Picture Mode)
(Cyan): Moving Picture (MPEG4)
Recording
(Red): While Moving Picture (MPEG4)
recording is activated
(Red): No Card (MPEG4 Mode)
(Cyan): Voice Recording Mode
(Red): While Voice Recording is
activated
(Red): No Card (Voice Recording Mode)
ª
To Change the Counter Display Mode
By changing [C.DISPLAY] on the
[DISPLAY SETUP] Sub-Menu, you can change
the Counter Display Mode to Tape Counter
Indication [COUNTER] (0:00.00), Memory
Counter Indication [MEMORY] (M0:00.00), and
Time Code Indication [TIMECODE]
N F SF
640
640
SVGA
XGA
SXGA
UXGA
QXGA
PICTURE
PICTURE
PICTURE
MPEG4
MPEG4
MPEG4
VOICE
VOICE
VOICE
(0h00m00s00f). (
-15-
) By repeatedly pressing the
[COUNTER] Button on the Remote Controller,
you can change the Counter Display Mode.
ª
To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY SETUP] Sub-Menu. (
-15-
)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª
To Change the Display Mode
By changing [DISPLAY] on the
[DISPLAY SETUP] Sub-Menu, you can change
the Display Mode to All Function Display [ALL],
Partial Display [PARTIAL] and Minimum Display
[OFF]. (
-15-
)
Owner ID
You can register your name and address in your
Movie Camera to identify the owner.
1
Set [CAMERA FUNCTIONS] >>
[OTHER FUNCTIONS1] >> [OWNER ID SET]
>> [YES].
≥
The [OWNER ID] Menu appears.
2
Turn the [PUSH] Dial
(38)
to select
[PIN NUMBER] and press the [PUSH] Dial
(38)
to input desired numbers.
3
Turn the [PUSH] Dial
(38)
to select numbers
and press the [PUSH] Dial
(38)
to enter
them.
≥
Be sure to input 4 digits. Otherwise the Pin
Number will not be registered.
4
Press the [
∫
] Button.
5
Repeat Steps 2–4 to input desired
characters for [NAME] and [POSTCODE].
≥
You can input up to 12 characters in [NAME],
and up to 11 characters in [POSTCODE].
6
Press the [
∫
] Button to finish the setup.
To Verify Owner ID
Keep pressing the [
;
] Button for approximately
5 seconds.
To Correct the Contents
If Owner ID has already been set, carrying out
Step 1 will display [INPUT PIN NUMBER] on the
screen. Input the Pin Number you have already
selected. If the number is not correct, the screen
will not change. If the number is correct, the
contents of the setup will be displayed. (By
repeating Steps 2 to 4, you can change the
contents.)
ENGText.fm 52 ページ ２００３年２月１２日 水曜日 午後１０時４分