Edit mode
48
VQT0T16
Printing pictures by directly
connecting to the printer (PictBridge)
To print pictures by directly connecting the movie
camera to the printer, use a printer compatible
with PictBridge. (Read the operating instructions
for the printer.)
≥
Insert a card and set to Card Playback Mode.
1
Connect the movie camera and the printer
with the supplied USB
cable.
1
USB cable
≥
The [PictBridge] indication appears on the
screen of the movie camera.
(When the printer is being recognized, the
[PictBridge] indication blinks.)
≥
When no card is inserted in the movie camera,
the [PictBridge] indication does not appear.
(You cannot print any pictures.)
≥
When the movie camera and the printer are not
connected properly, the [PictBridge] indication
keeps blinking. (It will blink for over approx.1
minute.) Connect the cable or check the printer.
≥
We recommend using the AC adaptor as the
power supply.
≥
When images are displayed in multi-screen,
they cannot be printed.
2
Select [SINGLE PRINT] or [DPOF PRINT].
≥
If there is no file with a DPOF setting, you
cannot select [DPOF PRINT].
≥
When you select [DPOF PRINT] for printing,
set the number of prints in DPOF setting.
≥
When [DPOF PRINT] is selected, print after
you determine the paper size. (Step 6)
≥
When [DPOF PRINT] is selected,date
printing is unavailable.
3
Move the joystick left and right to select a
desired picture, and then press it.
4
Select the desired number of prints.
≥
You can set up to 9 prints.
5
Select the setting for date printing.
≥
If the printer is not capable of date printing,
this setting is unavailable.
6
Select [PAPER SIZE].
[STANDARD]: Size specific to the printer
[4
a
5 INCH]
[5
a
7 INCH]
[4
a
6 INCH]
[A4]
≥
You cannot set paper sizes not supported on
the printer.
7
Select [PAGE LAYOUT].
[STANDARD]: Layout set on the printer
[
]
:
No frame
[
]
:
With frame
≥
You cannot set a layout not supported on the
printer.
8
Set [PRINT] >> [YES] to start printing.
ª
When you stop printing halfway
Move the joystick down.
≥
Avoid the following operations during printing.
These operations disable proper printing.
≥
Disconnecting the USB cable
≥
Removing the card
≥
Switching the mode dial
≥
Turning off the power
≥
Check the settings for the paper size, quality of
print, etc. on the printer.
≥
Still pictures recorded on other equipment may
not be printed.
≥
When the movie camera and the printer are
connected in the Tape Recording/Playback Mode,
the [
] Indication may appear on the LCD
monitor. However, pictures cannot be printed.
≥
The sides of pictures recorded when [16:9] is
set may be cut at printing. (When you purchase
this unit, [REC ASPECT] is set to [16:9].) When
using a printer with a trimming or borderless
function, cancel this setting. (Refer to the
operating instructions of the printer for details.)
1
PictBridge
EP_Eng_body.fm 48 ページ ２００５年１１月２５日 金曜日 午後３時５８分
