Playback mode
36
VQT0T87
Playback on TV
Images recorded by this camera can be played
back on a TV.
≥
Insert a recorded tape into this camera.
1
Connect the movie camera and a TV.
≥
Connect the movie camera and a TV by using
the AV cable
1
.
≥
If the TV has an S-Video terminal, then also
connect an S-Video cable
2
(optional). It
allows you to enjoy more beautiful images.
≥
If your TV is not equipped with AV Input
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
2
Turn on this camera and set the mode dial
to the Tape Playback Mode.
3
Select the input channel on the TV.
4
Move the joystick up to select the [
1
/
;
]
icon to start playback.
≥
The image and audio are output on the TV.
5
Move the joystick down to select the [
∫
]
icon to stop playback.
≥
Whenever plugging in the S-Video cable, plug in
the AV cable, too.
≥
Use the AC adaptor to free you from worrying
about the battery running down.
ª
If the image or audio from this camera
is not output on the TV
≥
Check that the plugs are inserted as far as they
go.
≥
Check the connected terminal.
≥
If the image does not appear on the TV even if
[BASIC] >> [AV JACK] >> [OUT/
Ë
] are set,
then set to [OUT]. (
-46-
)
≥
Check the TV’s input setting (input switch).
(For more information, please read the
operating instructions for the TV.)
ª
To display the on-screen information
on the TV
The information displayed on the LCD monitor or
the viewfinder (operation icon, time code and
mode indication, etc.), date and time can be
displayed on the TV.
1
Press the [EXT DISPLAY] button on the
remote control.
≥
Press the button again to erase the OSD
information.
Playing back card
≥
Set to Picture Playback Mode.
1
Operate with joystick.
E
:
Plays back the previous picture.
D
:
Plays back the next picture.
1
/
∫
:
Slide show (Plays back the still pictures
on the card in order) start/stop
≥
While the data on a card are played back, do
not operate the mode dial.
≥
When the access lamp is lit, do not insert or
remove a card.
≥
It takes time to display the file depending on the
number of pixels of the file.
≥
If you attempt to play back file recorded in a
different format or file data is defective, the
whole display becomes bluish and the
“UNPLAYABLE CARD’’ indication may appear
as warning.
≥
When playing back a file recorded on other
equipment, the date and time display is different
from when it was recorded.
≥
When playing back a picture recorded on other
equipment, its size and that of this movie
camera may appear differently.
AV/
S-VIDEO
21-pin Adaptor
1
2
[VIDEO IN]
[AUDIO IN]
[S-VIDEO IN]
PC
GS180_EB.book 36 ページ ２００６年１２月２０日 水曜日 午後９時３９分
