11
22
22
22
11
2
1
2
1
11
22
33
2
1
2
1
To Clean
Removing
1
. Tilt up the evap pan
a bit and then lift it
upward until the evap
pan hole unlocks from
the hook evap pan.
2
. Pull the evap pan until
it touches with the evap
pipe then carefully take
it out under the evap
pipe.
Attaching
1
. Insert the evap pan under the evap pipe.
2
. Insert the evap pan hole into the hook evap
pan as well as press-fi tting both sides.
Evap pan (Backside of the refrigerator)
●
Do not damage or deform the Evap pipe.
Evap pipe
Hook evap pan
ICE TWISTER (Quick Ice Making corner)
ICE BOX
ICE TRAY
Removing
1
. Unhook the protrusion by lifting it upward
and pulling the ice tray and/or ice box
forward until completely removed.
Attaching
2
. Push the ice tray and/or ice box until it
reaches the end lock.
Note
You can disassemble the ice tray and
ice box to increase space in the freezer.
Case (Freezer compartment)
1
. Pull the freezer draw out towards yourself.
2
. Lift up the drawer slightly and pull towards yourself until it
reaches the stoppers.
3
. Lift both sides of the bottom freezer case and move upward to
remove.
●
The contact sections of the drawer rails have been coated with
lubricant. Do not wipe it off.
Evap pipe
14
Notice
06_AUS/NZ_OI_NR-CY54A-EN.indd 14
11/19/2558 BE 10:50
Warning
