Trays
Door shelf
Vegetable case / Chilled case
Removing
1
. Unhook from the protrusion at the rear of the
tray by lifting the tray upward and pulling the tray
forward until it comes free, tilt and remove the
tray by rotating it.
Attaching
2
. Push the tray until it reached the end lock.
Removing and re-installing for cleaning.
Before cleaning or conducting maintenance, be absolutely sure to disconnect the power plug from
the power outlet. Do not connect or disconnect the power plug with wet hands.
When the plug is disconnected, leave it for 10 minutes before plugging again. If not, the compressor
may not work.
Removing
1
. Pull the case unit forward until it reaches the end of the stopper.
2
. Lift the front of the case unit slightly and remove completely.
Attaching
1
. Insert the case unit into the supports.
2
. Raise the case unit up slightly and push forward until the end is
reached.
●
When removing the tray above the vegetable case,
n
e
h
t
d
n
a
t
s
r i
f
e
s
a
c
e
l
b
a
t
e
g
e
v
e
h
t
t
u
o
l
l
u
p
e
s
a
e
l
p
follow to removing the tray as above.
●
In case of attaching the tray and it does not lock,
make sure that you did not attach the wrong tray.
Notice
●
To maintain vitamins in fruits and vegetables, please ensure the
drawer locks properly after use.
To Clean
Removing
1
. Lift it upward, alternating between the right and left side.
Attaching
2
. Place on both supports and then press in until it reaches the
end of supports.
Rail
Protrusion
13
Notice
To Clean
Cleaning
T
ips
06_AUS/NZ_OI_NR-CY54A-EN.indd 13
11/19/2558 BE 10:50
