Prime Freeze
Remark
● Always place food on the aluminum heat transfer plate for the best effectiveness of cooling.
●
When hot or wet food is placed on the aluminum heat transfer plate without a lid or food
wrapper, the surface of the food may be frozen and the inside of Freezer compartment may
be frosted. If you are worry, please use lids or food wrapper.
●
If cooked food is still at a high temperature, it should be cooled down to about 70 °C before
putting in the Prime Freeze case.
●
Leaving a glass bottle or can inside the compartment may pose a risk of breakage,
cracking, or damage.
●
Do not place the food which is higher than the height of the Prime Freeze case to avoid
the risk that the Prime Freeze case does not close completely, causing frost and damaging
food or food containers in the room.
●
Do not touch the metal food container directly with wet hands, as there is a risk of frostbite.
●
During the operation of Prime Freeze:
• ECONAVI operation will be stopped.
• The noise from the fan will be louder.
• The power consumption will be higher than normal.
• Prime Freeze will be stopped if below modes are set:
For BW530H: Prime Fresh+, Quick Ice/Freezing
For BW530J: Prime Fresh+, Quick Freezing, Quick Ice Making.
•
The flashing of [Prime Freeze] LED means that the defrosting system is currently
working. “Prime Freeze” will start right after the defrosting operation is finished. This is a
normal phenomenon.
●
When Prime Freeze is not in use, this case can also be used as any other position in the
Freezer compartment.
•
Small foods can be stored for easier finding.
• The temperature in this room may be higher than the temperature in the entire
Freezer compartment. For long-term preservation, please transfer food to the Freezer
compartment.
31
