Operation Panel
※
For BW530J models
1
LED of compartments: the icon of the respective compartment will light up when the
compartment is selected.
2
Temperature and time display area: displays the temperature of Fridge compartment,
Freezer compartment, Prime Fresh case and the time for modes of the Prime Freeze.
3
Temperature control button of Fridge compartment.
4
Control button of Freeze compartment, control button and LED of Quick Freezing mode.
5
Temperature control button of Prime Fresh mode.
6
Temperature control button and LED of Prime Fresh+ mode.
7
Temperature control button and LED of Prime Freeze mode.
8
LED of Quick Ice Making mode.
9
Control button of Quick Ice Making mode and LED of Filter Change.
0
Control button of Auto Ice Off mode, control button and LED of Auto Ice Clean mode.
a
LED of Auto Ice Off mode.
b
Icon nanoe
TM
X and display LED.
Remark
●
On the Operation Panel: “*Extra function: Press 3 sec”, means that you need to press and hold
the button beginning with “*” mark for 3 seconds when you want to start the extra functions.
● Under normal conditions, the Operation Panel light will turn off. When you press the
buttons, the Operation Panel light will turn on. The Operation Panel light will turn off and all
the buttons will not be operated when the refrigerator door is opened.
●
In summer, when the temperature is high, if you put uncooled food in the refrigerator or
open/close the refrigerator doors repeatedly, the temperature inside will increase and the
displayed value will be higher than the setting temperature.
● When first plugged in, the Operation Panel will display the introduction of modes and the
temperature of compartments for about 10 seconds. Buttons will not be active during this
period of time. After 10 seconds, the Operation Panel can be adjusted normally.
●
For BW530J models only (Auto Ice and Water Dispenser): The LED of Filter Change will
turn on in orange LED every 6 months for notifying the recommended time to change the
Water Filter Cartridge.
24