Preparations
Installation
7
The refrigerator must be located in the
place where there is good air circulation.
There should be a space between the top
of the refrigerator and the ceiling at least
30 cm as well as the space between the
wall and the back of the refrigerator
at least 10 cm and the side of the
refrigerator and the wall at least 5 cm.
Do not locate the refrigerator in a humid
place as rust may form and may cause
electric leakage.
Do not locate the refrigerator
exposing to direct sunlight as
the heat and sunlight will increase
the temperature.
When moving or shifting
the refrigerator, remove all trays
and check to be sure that there
is no water in the refrigerator.
If there is no ground wiring plug in
refrigerator, it should be connected with
ground connection to prevent hazard from
electric leakage.
In case of placing the refrigerator on an
uneven surface, adjust the leveling stand to
make the refrigerator stands stably.
Bring power cord set for use should be lift up
left drain tray until locked off and then take out power cord set from
drain tray after that insert drain tray into the block as well as press-fitting
both sides.
Installation
10 cm
30 cm
5 cm
How to use
NR-BW414/NR-BW464_EN,VT.indd 7
2/23/10 11:52:34 AM
