1
LED of compartments: the icon of the respective compartment will light up when the
compartment is selected.
2
Temperature display area: display the temperature of Fridge compartment, Freezer
compartment, Prime Fresh case.
3
Temperature control button of Fridge compartment.
4
Temperature control button of Freezer compartment.
5
Temperature control button of Prime Fresh case, control button and LED of Prime Fresh+.
6
Control button of Quick Freezing.
7
LED of Quick Freezing.
Remark
●
On the Operation Panel: “*Extra function: Press 3 sec”, means that you need to press and
hold the button beginning with “*” mark for 3 seconds when you want to start the extra
functions.
●
Under normal conditions, the Operation Panel will display latest setting status. When you
press a button, the refrigerator will generate a sound and begins to allow setting changes.
●
In summer, when the temperature is high, if you put uncooled food in the refrigerator or
open/close the refrigerator doors repeatedly, the temperature inside will increase and the
displayed value will be higher than the setting temperature. Therefore, it is necessary to
reduce doors opening times.
● When first plugged in, the Operation Panel will display the introduction of modes and the
temperature of compartments for about 8 seconds. Buttons will not be active during this
period of time. After 8 seconds, the Operation Panel can be adjusted normally.
Operation Panel
9
