Prevent tipping
In order to prevent the
refrigerator from tipping
due to earthquakes,
permanently fix it by using
belts, etc.
Fix the refrigerator.
Turn the adjuster
bolts (right and left)
until they reach the
floor to stabilize the
refrigerator.
Refrigerator doors should not be opened during the interior cooling process.
The doors should not be opened until the interior has been cooled down sufficiently.
(Warm air flowing into the interior will block the cooling function.)
Please wait until the interior has cooled down.
●
The refrigerator may take at least 4 hours of continuous running to cool down the
interior, in the condition of no load inside and the doors are not opened.
●
Depending on ambient temperature and usage condition, it may take 24 hours to cool
down the interior and achieve equilibrium.
LED lamp and grounding
●
The refrigerator LED lamp, specially designed for this refrigerator, do not replace it by
yourself. If you need replacement, please contact Panasonic Service Center.
●
If the refrigerator plug has no ground wire, it should be connected with a grounding
connection to prevent electrical hazard from electric leakage.
Moving or shifting
1
Remove ice in the Ice trays and Ice box.
2
Unplug the refrigerator.
3
Adjust the adjuster bolts (left and right) so that they do touch
the floor.
4
Place a container underneath the drainage hole, then slowly tilt
the refrigerator backward to drain water from the drainage hole.
This action requires 4 or more people, of which 2 people lift the
front of the refrigerator to prevent the refrigerator from sliding
and avoid the risk of accidents.
※
How to move and transport
●
At least 4 people are required to transport the refrigerator.
●
Each person lifts a corner of the refrigerator.
●
Do not transport by holding the refrigerator doors.
Caution
●
When transporting, use straps to secure the refrigerator doors
and avoid letting the doors open by itself.
●
Do not place the refrigerator on its side when transporting, as this may cause damage
to the refrigerator.
●
After installation, wait at least 4 hours before plugging in the power to ensure that the
gas and oil in the compressor are in a stable state.
Drainage hole
7
