15
Appendix
Troubleshooting
In these cases?
Check here.
The refrigerator does not
operate.
● Check that the plug and wall socket are in good condition.
● Check if there is any problem with the mains fuse or house wiring.
● Check by unplugging for 10 minutes and plugging back in.
The refrigerator does not
cool enough.
● Check to be sure that the temperature control dial is at the proper
position.
● Check to ensure that the refrigerator is not overloaded with
foodstuffs or that hot food have been placed in the refrigerator.
● Is the refrigerator exposed to direct sunlight or a heat source?
● Is the refrigerator door completely closed?
● Is the refrigerator door opened frequently?
Vapor generated inside and
outside the cabinet / surface
of door.
● Condensation may appear on the surface of the cabinet when
humidity is high or air circulation around the unit is poor.
●If there is condensation inside, check if the door is completely closed.
●Is the refrigerator door frequently opened or left open for a long time?
●Have any moisture-rich foodstuffs been placed inside the refrigerator?
The refrigerator generates
noise.
● Check if the refrigerator is located on a stable, level floor and is
installed correctly.
Use the adjuster bolt if required to level the refrigerator. (P. 5)
● Check if there is any object in contact with the refrigerator.
● Cracking sound within caused by the parts adjusting temperature
which is normal.
● After installation, the refrigerator may make loud noise.
The noise will be less when the refrigerator has been cooled.
Food becomes frozen
● Was the food placed near the cold air duct?
● If the temperature control has been set to “5” (Max) try adjusting the
temperature control to the “1” (Min) setting.
