Panasonic NR-B32FX3, Руководство по обслуживанию

Страница: 37 / 52

37
2. TEMP FUSE A’SSY
a. Cut Cable Tie that is fixation of Temp Fuse A’ssy in left
side of Evaporator.
b. Pull Bag Joint from storage place of upper side.
Cut Cable Tie of Bag Joint, then take out wires and
connectors from its inside.
c. Peal off the tape which bundled wires. Remove the
connectors of Temperature Fuse A’ssy press and pull
or pull, then replace new one.
NOTES ON INSTALLATION OF TEMP FUSE A’SSY
• Tighten Temp Fuse A’ssy by Cable Tie to pipe of Evapo-
rator as before.
• Tighten Bag Joint that is put in the connector of Temp
Fuse A’ssy with other connectors by Cable Tie as before.
• Store Bag Joint to the place as before.
3. DEFROST HEATER A’SSY
a. Remove Defrost Heater A’ssy forward from right and
left side hooks that are fixation of Defrost Heater A’ssy
while pressing up hooks.
b. Remove Heater Cover of upper side of Defrost Heater
A’ssy.
c. Release hooks, and peal off the tape which bundled
wires. then remove Defrost Heater A’ssy.
d. Pull Bag Joint from storage place of upper side. Cut
Cable Tie of Bag Joint, then take out wires and con-
nectors from its inside.
e. Pull out two connectors of Radiant Heater A’ssy, then
replace new one.