Panasonic NR-B29SG2 Скачать руководство пользователя страница 17

Страница: 17 / 97

7.1.3.

Eco Mode

7.1.4.

Holiday Mode

Features :

• In this mode, the control unit operates the FC and PC economically.
• In this mode, the PC temperature is automatically set to 4

C and the FC temperature is

automatically set to -18

Settings :

1. Press

repeatedly until a circle appears around.

2. If no operation is performed for 1 second during the setting process, the circle around

flashes and a beep will be heard, indicating that Eco Mode is set.

• During this mode, [E] is displayed on the PC / FC temperature display, and a circle is dis-

played around

• To release the mode, press

Notes:

• During this mode:

- FC and PC can be adjusted. When Eco Mode is released, the adjustment will be main-

tained.

- Super Cool Mode and Super Freeze Mode can be selected. Eco mode is released auto-

matically, and the selected mode is activated.

- After releasing Eco Mode, Holiday Mode can be selected, and the selected mode is acti-

vated.

Features :

• Set this mode when the fridge is not going to be used for a prolonged period such as during

a long vacation.

• In this mode, the PC temperature is automatically set to 8

C and the FC temperature is

automatically set to -18

Settings :

1. Press

repeatedly until a circle appears around

2. If no operation is performed for 1 second during the setting process, the circle around

flashes and a beep will be heard, indicating that Holiday Mode is set.

• [H] is displayed on the FC temperature display. No indication appears on the PC temperature

display

• During this mode, [H] is displayed on the FC temperature display, and a circle is displayed

around

Notes:

• Before using this mode, empty out the fridge, and close its door.
• When this mode is ended, the fridge will resume operation with its previous settings.

- FC and PC can be adjusted. When Holiday Mode is released, the adjustment will be

maintained.

- Super Cool Mode and Super Freeze Mode can be selected. Holiday mode is released

automatically, and the selected mode is activated.

- After releasing Holiday Mode, Eco Mode can be selected, and the selected mode is acti-

vated.

Содержание NR-B29SG2


































































































Результаты поиска

Содержание NR-B29SG2

Отзывы:

Похожие инструкции для NR-B29SG2

Бренды по названию

Популярные бренды

Panasonic NR-B29SG2, Руководство по обслуживанию

Результаты поиска

Содержание NR-B29SG2

Отзывы:

Похожие инструкции для NR-B29SG2

Бренды по названию

Популярные бренды