Panasonic NN-S732, Руководство по эксплуатации

Страница: 8 / 32

8
Feature Diagram
Control Panel
Internal Air Vents
Door Safety Lock System
External Air Vents
Control Panel
Identification Plate
Glass Tray
Rotating Ring
Heat/Vapor Barrier Film
(do not remove)
Menu Label
Cover (do not remove)
e
a
f
d
c
b
g
h
i
j
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the
instruction. The oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep.
i
e
a
c
h
b
c
f
g
j
d
1. DISPLAY WINDOW.
2. AUTO DEFROST PAD (Page 12)
3. POWER LEVEL PAD (Page 9)
4. AUTO REHEAT PAD (Page 11)
5. AUTO COOK PAD (Page 14)
6. NUMBER PAD
7. TIMER PAD (Page 10)
8. POPCORN PAD (Page 11)
9. QUCIK MIN PAD (Page 9)
10. CLOCK PAD (Page 9)
11. SERVING/WEIGHT PAD (Page 14)
12. START PAD.
One tap allows oven to begin functioning. If door is
opened or STOP/RESET pad must be pressed again
to restart oven.
13. STOP/RESET PAD.
Before cooking: One tap clears your instruction.
During cooking: One tap temporarily stops the
cooking process. Another tap cancels all your
instructions and time of day or colon appears on the
Display Window.
9
Clock Setting
Child Safety Lock
The oven will operate without setting the
clock.
NOTES:
1. To reset the clock, repeat steps 1-3.
2. The clock will keep the time of day as long
as the oven is plugged in and electricity is
supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while colon is flashing.
NOTES:
1. You can use other power levels, select desired
power level before setting cooking time.
2. After setting the time by Quick Min Pad, you
cannot use Number Pads, and vice versa.
3. Press Quick Min Pad to add more time during
cooking. To verify the additional cooking time,
check the Display Window.
NOTES:
1. For more than one stage cooking, repeat
steps 1 and 2 for each stage of cooking
before pressing Start Pad.
2. When selecting P10 (HIGH) power for the
first stage, you may begin at step 2.
3. Two beeps will sound between each stage
of programming. Five beeps will sound at
the end of the enrire sequence.
4. When selecting P10 (HIGH) power, the
maximum programmable time is 30 minutes.
For other power levels, the maximum time is
99 minutes and 99 seconds.
5. For reheating, use P10 (HIGH) for liquids,
P7 (MEDIUM-HIGH) for most foods and P6
(MEDIUM) for dense foods.
6. For defrosting, use P3 (MEDIUM-LOW).
You can use this safety feature to lock the
control panel so that children cannot use the
oven when you do not want them.
1.
2.
3.
• Press once.
➤
Colon flashes.
• Enter time of day using
the number pads.
➤
Time appears on the
Display Window: Colon
continues flashing.
• Press.
➤
Colon stops flashing;
time of day is entered.
1. • Hold until “L”.
appears from the
display.
Example: To set 11:25 a.m. or p.m.
To set CHLID SAFETY LOCK:
1.
• Hold until “L”.
appears from the
display.
To cancel CHLID SAFETY LOCK:
Quick Min Function
This feature allows you to set and/or add cook-
ing times easily in multiples of one minute.
1.
2.
• Set cooking time
(up to 10 taps/minutes)
To set Standing Time:
Power & Time Setting
How do I program Power and Time?
1.
2.
3.
• Select Power Level.
(according to the
chart below)
• Set Cooking Time using
number pads.
Press
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
Power Level
P10 (HIGH)
P 9
P 8
P 7 (MEDIUM-HIGH)
P 6 (MEDIUM)
P 5
P 4
P 3 (MEDIUM-LOW)/DEFROST
P 2
P 1 (LOW)
• Press.
➤
Cooking will start. The
time on the screen will
count down.
Example: To cook at P6 (MEDIUM) Power
for 1 minute 30 seconds.
• Press Start Pad.
➤
Cooking will start on
P10(HIGH) power.