background image

4

2.OPERATING PROCEDURE

2.1 Setting the Clock

When the oven is fist plugged in “88:88” appears in the display window
Example: to set 11:25pm.

2.2 Microwave Cooking and Time Defrosting

The glass turntable must always be in position when using the oven.

Multi-Stage Cooking

The oven has 3 stage memory, so you can program up to 3 different instructions and the oven will switch automatically from
power to power except timer function. (Repeat steps 1 and 2 above but only press Start after all stages have been entered).

2.3 Timer

This feature operates as a minute timer without microwave energy.

NOTE: The maximum time to delay start is 59 minutes, 90 seconds.

2.4 Weight Conversion

This feature allows you to convert weight in g to lb/oz.

2.5 Auto Weight Defrost

This feature allows you to defrost joints of meat and bread automatically once you have entered the weight of the food.

Press 11times --

Press 5 times --

-- Press twice

Press Clock pad.

Press Time pads.

Press Clock pad.

Display will show "12H"

Enter time of day by pressing appropriate time pads

Numbers stop blinking.

When you press any number pads,numbers will start blinking.

Press the pad with the power

Select cooking time by pressing

Press Start

you require.

appropriate pads.

The cooking program will start and the
time in the display will count down.

Press Timer pad.

Set the time you want to count down.

Press Start

Select desired program.

Set weight.

Press Start.

Press the pad once to select bread,

Press Up pad the window will display a weight in grams or

Remember to stir or turn the food

and twice to select meat.

ounces. Adjust the weight using the Up and Down pad. 

during defrosting.

The weight will change in 10g or 1 oz increments.

Press g/lb, oz pad

Press g/lb, oz pad one more

It will change g to lb, oz

It will change lb, oz to g

CAUTION

The oven will automatically work on HIGH microwave power if a cooking time is entered without the power level previously being selected.

Wattage

High

800 Watts

Medium

470 Watts

Simmer

140 Watts

Defrost

Cyclic

Содержание NN-E251W















Отзывы: