English
- Eng-52 -
Care of your Microwave Oven
(continued)
Cleaning the Water Tank
Clean with a soft sponge in water.
Remove the water tank and clean the compartment where the
water tank is inserted.
Open the water supply cap, remove the lid and pipe cap and
clean.
If the pipe cap is dif
fi
clult to remove, wiggle from side to side.
When re-
fi
tting, make sure that the pipe faces down (see
diagram).
The rubber seal and front of the tank can also be removed for cleaning.
Removing the Rubber Seal
Inside
(
fl
at)
Outside
(protruding
side)
Ensure that the rubber seal is not inside out when re-
fi
tting.
If the seal is not
fi
tted correctly the lid will not close securely
and it will leak.
Removing the Front Cover
1. Lightly twist the cover until the far side unclips.
2. Continue to twist until the near side unclips.
Re-
fi
tting the Front Cover
1. Align the slots on the cover with the holes on the tank.
2. Insert and push down until it clicks.
Notes:
1. Clean the water tank at least once a week to prevent build up of limescale.
2. Do not use a dishwasher to clean the water tank or parts of the water tank.
Pipe Cap
Ensure it faces downwards
1
1
2
2
IP4965_3BH70HP_Eng_30_140703.indd 52
IP4965_3BH70HP_Eng_30_140703.indd 52
2014-7-3 15:39:32
2014-7-3 15:39:32