- 15 -
NC-TXF22, NC-TXF30
1. Adjust lock pin of stopper comp. at “Release”.
2. Put minus screwdriver into stopper comp., gap and use power to remove it.
4.16 Stopper comp.
FIG. 16
Operating point
After assemble, should to feel to touching of supporting plate on lock knob.
Stopper comp.
Bottom up thermo pot and press lock lever A deepest then pust it down and pull out.
4.17 Lock lever A (Assemble - Remove knob)
FIG. 17
Lock lever A
Remove this portion
as shown with arrow
