- 14 -
NC-TXF22, NC-TXF30
4.14 Lock knob A, Lock spring A and Lock spring B
1. Catch lock spring A by wrench and pull out.
2. Follow the first section and remove lock
Spring B.
3. Remove lock knob B off.
FIG. 14
Lock spring A
Lock spring B
Lock knob B
FIG. 15
4.15 Supporting plate
1. Adjust lock pin of supporting plate at
“Release”.
2. Remove supporting plate off.
Operating point
When assemble, make sure that caution label
is on the correct position.
Supporting plate
Lid slot
Supporting plate
