㓚⸻ᢿᴺ
ᧄᢥਛߩࠗࠬ࠻ߩࡦࡊߩ␜ߪਅ⸥ߩㅢࠅߢߔޕ
ᧄ⦟ุ⏕࠹ࠬ࠻
ḡᴣ߆ߒޔ᷷࠹ࠬ࠻
ᠲᣇᴺ
േౝኈ
Water
fi
ll
Water level gauge
Approx. 1000 ml.
-2.0-
-1.0-
-Min-
3.0
Panasonic
- 3 -
NC-BH30P, BH40P
2. Failure diagnostics
Before starting failure diagnostics, check the operation
following the pot performance test modes described
below.
2.1. Pot performance test mode
2.1.1. Boiling and keep warm test
Procedure
1. Pour approx. 1000 ml water into the container.
2. Turn the power on.
3. Push Select pad and set 98.
The markings in the illustration mean as follows.
●
Continuous illumination
Flashing
Performance
1. The reboil lamp illuminates, and the boiling
operation starts. (LCD indicates a temperature
higher than 5°C rounded to every 5°C.)
2. After 9 minutes, vacuum keep warm lamp
illuminates and switches to the keep warm
mode. (Keep warm mode)
÷
After approx. 9 minutes, the 100 keep warm lamp
changes to 98.
÷
After approx. 3 minutes, the 90 keep warm lamp
changes to 98.
÷
After approx. 3 minutes, the 80 keep warm lamp
changes to 98.
÷
After approx. 3 minutes, the 60 keep warm lamp
changes to 98.
÷
Required time for the water temperature to increase
to the set temperature
98 keep warm: approx. 1 to 2 minutes
90 keep warm: approx. 1 to 2 hours
80 keep warm: approx. 2.5 to 4.5 hours
60 keep warm: approx 8.5 to 13 hours
(in conditions of room temperature of 20°C with full
water volume)
60 80 90 98
Dechlorination
Reboil
Timer
Select
Citric acid cleaning
(Push for 3 seconds)
Vacuum keep warm
Pour
out
Unlock
25
60 80 90 98
Dechlorination
Reboil
Timer
Select
Citric acid cleaning
(Push for 3 seconds)
Pour
out
Unlock
100
Vacuum keep warm
NC-BH40-30-22.indd 3
NC-BH40-30-22.indd 3
14-08-07 16:47:56
14-08-07 16:47:56
