4
Operation Panel
Water Supply Selector
Wash / Cycle Selector
Spin Timer
Water Supply Selector to water inlet.
- Wash Tub (Left)
- Spin Tub (Right)
This selector is to set for the Wash type and
Drain.
1. 2 types of Wash selection
- Regular
- Gentle
2. "Drain" for drain the water from
the Wash Tub.
This selector is to turn to your desired length of time for
spin-dry laundry for up to 5 min. If you want to set the timer
to 2 min. or less, turn the selector beyond the 4 min. position,
and then turn it back to the desired position.
-Be careful of the water spills out onto the control panel.
-Do not place any wet clothes on the control panel.
-Do not use any chemical, thinner to wipe the machine.
Warning
When supplying water into the spin tub, water
may splash out to the wash tub
if there is too much
water filled.
To prevent splashing,
adjust the water tap
appropriately.
Note:
For simplify, Operation Panel illustration using NA-W120G1 model
R
T
