14
Installation
(continued)
4. Connect the water supply hose.
1
1
Hold the elbow and tighten the nut.
2
Check that the elbow is not loose.
●
The procedure for cold water
and hot water is the same.
2
3
Turn on the water faucets
slowly and make sure there
are no leaks.
●
Do not make wrong
connection for the HOT
and COLD water supply
faucets.
●
Tighten the nut firmly.
●
Do not twist, squash, modify
or cut the hose.
●
●
Time for hot water to reach washing machine will depend on proximity of washing machine to hot water tank.
Elbow
Connect the water
supply hose to the water
supply valve screw.
Connect the water supply
hose to the water faucet,
and tighten the nut
clockwise with your hand.
.
Water faucet
Water supply hose
Water supply
valve screw
Nut
Water supply
hose
COLD HOT
CAUTION
NOTE
If you have an uncontrolled water heating source (e.g., wet back, solar heating),
fit a tempering device (e.g., a safe valve). This will ensure the hot water temperature remains within safe limits.
Contact a local plumber or plumbing supply merchant for the most suitable type of tempering device.
5. Connect the power plug and grounding wire.
●
Plug the power cord into a dedicated household 3-pin AC outlet rated at 10 A, 220 V to 240 V.
If you are not sure, contact a quali
fi
ed electrician.
6. Check that the washing machine is level.
The bubble should be at
the centre of the mark.
Leveller
Mark
Bubble
■
If the bubble is out of the mark
3
Turn to the right to
tighten.
1
Turn the adjustable leg knob to
the left to loosen.
2
Turn the adjustable
leg to eliminate
wobble.
To lower
To raise
7. Perform a trial operation.
●
Check that there is no water leakage, abnormal sounds or error display.
