Panasonic NA-F62B1 Скачать руководство пользователя страница 16

Страница: 16 / 20

How to install

Placement

Socket outlet

Establish a ground (In case of two-wire power cords)

• When there is a grounding receptacle on power supply

outlet.

• When carbon ground rod (sold separately) is used.
• Do not connect to gas pipe, water pipe, or ground wire

of telephone or lighting rod.

• Reestablish a ground when you change installation

location or move.

• For further information, contact the distributor or service

technician.

Grounding

receptacle

Ground
wire

Carbon
ground

• Do not install the washing machine in any extremely damp place such as a bathroom, or in a place

exposed to the weather. There is a danger of electric shock,

re, machine trouble and deformation of

machine.

• If machine is installed on the

oor, be sure that carpet does not block any openings to prevent it from

closing any ventilation openings.

• Do not install the washing machine exposed to direct sunlight (This could cause machine trouble,

deformation and other problem.)

Install Washing Machine Horizontally

Place the washing machine on a

at and secure location.

Open the lid, leveller is already

x on the Plastic Body surface. Visually check

that the bubble of the leveller is inside the mark from the front and top.

• There is no need to make

a height adjustment.

Plastic Body

Leveller

Adjust height

When the bubble is largely out of mark

• The

oor is largely inclined against the

direction that the bubble is leaning.

• Let the bubble inside the mark by

placing a board under the leg on the
other side.

Board or a like

When the bubble is a little out of mark

(Bottom view)

Front side

Adjust using
adjustable leg

Check the machine for unsteadiness and tightens the adjustable leg knob.

1. Turn the Adjustable Leg Knob towards

(LOOSEN) direction to loose it.

2. Turn the Adjustable Leg to adjust the

levelness.
• When increasing height, turn Adjustable

Leg towards (LOOSEN) direction.

• When decreasing height, turn Adjustable

Leg towards (TIGHTEN) direction.

3. Turn the Adjustable Leg knob towards

(TIGHTEN) direction to tighten it.

Tighten

Adjustable leg knob

Loosen

Adjustable leg

To raise

To lower

Bubble

Mark

When the bubble is inside the mark

Power cord

• Make sure to push the power plug completely into the socket outlet. If the power plug

is not completely pushed into the outlet, this will cause electric shock and

re due to

overheating.

WARNING

Make sure to establish a ground.

There is a risk of electric shock
caused by a leakage of electricity.

NA-F62-70B1-ENABPS.indd 16

5/8/08 9:16:44 AM

Содержание NA-F62B1





















Результаты поиска

Содержание NA-F62B1

Отзывы:

Похожие инструкции для NA-F62B1

Бренды по названию

Популярные бренды

Panasonic NA-F62B1, Руководство по эксплуатации

Результаты поиска

Содержание NA-F62B1

Отзывы:

Похожие инструкции для NA-F62B1

Бренды по названию

Популярные бренды