background image

13

Process settings

You can select PROGRAM to wash your own laundry according to your preferences. 

(By pressing [PROCESS] button)

7

 

WASH

To reuse the wash water.
•   After washing, the wash water is left in the tub and the machine stop operation.

7

 

SPIN

To spin the separately washed laundry.
•  If the water is left in the tub, it will drain before spinning.
•   If the lid is open, it will only drain without spin.

7

  

WASH

7

  

RINSE

To reuse the rinse water.
•   After washing and rinsing, the rinse water is left in the tub and the machine stop operation.

7

  

WASH

7

  

SPIN

To wash with water (without detergent).
•   The machine will spin automatically without rinsing after washing.

7

  

RINSE

7

  

SPIN

To rinse and spin the laundry soaked with detergent.
•   If the water is left in the tub, it will drain and followed by the intermediate spin before start of rinsing.

•  

In the case, when [SPIN] or [RINSE] [SPIN] is selected, if there is water in the tub, the machine will start from draining and 
if there is no water in the tub, it will start from spinning. So it will take a little while before the machine start operating.

•  IN THE CASE WHEN [CHILD LOCK] MODE IS SET.
 

In some cases, if the lid is opened when the tub contains water, the machine will start force draining. In this case, cancel 
the [CHILD LOCK] mode.

This is the course to prevent fungus growth at the washing and spinning tub using the “Chlorine system 
bleach for clothing use”, available in most markets, to keep the tub clean.

Do not use the oxygen system bleach or chlorine 
system bleach for kitchen use. (Too much lather 
may over

fl

 ow.)

•   Frequency for care : Once a month
•   Operation will be continued for 2 and a half hours.

Maintenance

To prevent fungus growth at the washing and spinning tub.

“TUB HYGIENE” Course

1

3

2

1

Press the [POWER ON] button.

2

Press the [PROGRAM] button 

fi

 ve times 

for “TUB HYGIENE” Course.

•  The [TUB HYGIENE] light will be indicated.

3

Press the [START/HOLD] button.

4

When 

fi

 lled up with water, press the [START/HOLD] button, and pour about a cup of 

chlorine system bleach for clothing use directly into the washing and spinning tub. 
(Approx. 200ml per 50L of water.)

5

Close the lid, and press the [START/
HOLD] button.

w

  Do not operate while clothing is in the washing tub.

w

  Cancel the “CHILD LOCK” when it is active. Refer 

to page 12.

Operation will be 

fi

 nished in 2 and a half hours.

[NOTE]

•   Fungus growth at the washing and 

spinning tub varies depending on 

ambient conditions.

NA-F62-70B1-ENABPS.indd   13

NA-F62-70B1-ENABPS.indd   13

5/8/08   9:16:39 AM

5/8/08   9:16:39 AM

Содержание NA-F62B1





















Отзывы: