Wall
1:Connection between ordinary tap and inlet hose.
2:Connection between screw tap and inlet hose.
• To
prevent water leakage, follow the
instructions in
this
chapter
Do not twist, crush, alter or cut the water inlet hose.
!
•
Warning!
Selection of tap
Please select
tap.
appropriate
Connection of inlet hose, tap and washing machine
clamp nut
tap
1.Loosen clamp nut to
show 5mm thread
2.Loosen four bolts
3.Set connecting base
on tap and tighten
bolts evenly
4.Tighten clamp nut
inlet valve
inlet hose
slide bushing
5.Press slide bushing,
insert inlet hose into
connecting base
6.Connection finished
7.After connection and installation,
check if there is water leakage
Connect the inlet hose to the tap with connector(as upper sketch).
Screw tap
Special washing
machine tap
Ordinary faucet
INSTALLATION
11
