There are three ways to place the end of drain hose:
•
• Position drain hose properly ,otherwise damage might result in water leakage.
Do not twist or extend the drain hose
.
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
Warning!
Warning!
floor drain
Under 3 m
Under 15 cm
1.
Check if the legs are closely attached
the cabinet. If not, please turn them to
their original positions by tightening the
nuts.
2.
Check alignment of the product with a
spirit level and if required, correct.
3.Loosen the lock nut and turn the feet
until it is in close contacts with the floor.
to
4.After being locked properly, press four
corners again to make sure that they are
adjusted properly.
• The
lock nuts
on all four feet must
be
screwed tightly
against
the
housing.
Levelling the washing machine
Warning!
Lock
nut
foot
Raise
Lower
lock
loosen
right
wrong
INSTALLATION
10
Installation of drain hose
1.Completely sleeve the drain hose over the sewer.
2.Fix and tighten it with a hoop.( As shown in the figure )
(If drain extension
is used)
Put end of
drain hose
into floor
drain
