- 15 -
Set to initial mode
for tension of belt
In case to change PCB or
move V-belt. Set the V-belt
tension to initial mode for using
below procedure.
The initial display will be
indicated “b0”, after that press
“Start/Pause” button once, it
shall be listened click sound six
times to set properly.
4
M
Indicate the error
message of the last
time
“Digit lights” shall be indicate
“E” initially, press “Wash” button
to show the last error and press
the wash button again to return
to initial mode.
If any error message occurred
in the past, “H” or “U” some
number shall be indicated
alternately.
If no error message occurred,
the light indicates “00”.
5
G
Indicate the
operation times
“Digit lights” shall be indicate
“C” initially, press “Wash”
button to change indication
Digit of operation times.
Press once : Digit “Thousand.
Hundred”.
Press twice : Digit “Ten.One”.
6
H
Service NA-F100A2.indd 15
Service NA-F100A2.indd 15
4/26/2559 BE 11:50 AM
4/26/2559 BE 11:50 AM
