Installation Instructions - 39
Moving and Installing
Installing the anchor bolts
Remove each cover cap.
1.
Insert each anchor bolt.
2.
Tighten each bolt with a spanner.
3.
Levelling the appliance
Loosen the plastic nut on each foot
1.
by turning it clockwise.
Adjust each foot by turning it
2.
clockwise or anticlockwise.
Use a spirit level to make sure that
3.
the appliance is properly levelled.
Tighten each plastic nut by turning it
4.
anticlockwise.
Caution
Make sure that all plastic nuts are
-
tightened securely and the feet
are still securely bolted to the
appliance.
If they are unbolted, the appliance
will move around.
Do NOT put cardboard, wood
-
or similar materials under the
appliance to compensate for
unevenness.
Be careful not to destabilize the
-
appliance when cleaning the floor.
Plastic nut
Foot
NA-148VB6_English_Pan-Euro.indb 39
2014-12-22 9:37:16