Panasonic MJ-CB800, Руководство по эксплуатации, Страница: 8 / 20

EN7
English
■
Juicer
1
Place the container unit
onto the motor housing.
●
Make sure the spout and the
clamps are positioned the same
as illustrated.
●
Make sure the container unit sits
properly on the motor housing.
2
①
Attach the pulp
container and make
sure it is fully aligned
with the body.
②
Place the spinner
in the container unit
and fix it into position.
③
Place the container cover onto the
container unit.
3
Push the clamps as
shown until a locking
sound is heard.
●
If the clamps are not clamped
correctly, the motor will not operate.
4
Place the juice cup as
shown.
●
Make sure the spout is in
the downward position when
juicing.
5
① Plug in and switch on.
② Insert the ingredients
one by one and push
them slowly into the
feeding tube using the
food pusher.
③ Align the food pusher
into the feeding tube as illustrated.
6
After use, switch off and unplug.
●
While removing the juice
cup, ensure the spout is
pulled up to prevent juice
from dripping.
●
Ensure the spinner is fully
stopped before release the
clamps.
●
Some pulp might be hard to
collect in the pulp container
and stick on the container cover depending on the
ingredients and amount.
1
Place the ingredients into
blender jug, and then close the
cover.
●
Pour liquid first, followed by soft ingredients
and then others.
(i) Liquid (ii) Soft ingredients
(iii) Hard ingredients (iv) Ice cubes
2
Attach blender jug to the motor
housing.
①
Align the △
on the motor
housing with
the ▽ on the
blender jug
base.
②
Twist blender jug clockwise until
you hear a click sound.
●
Blender jug only can be attached by above
steps.
3
Plug in. Hold
the cover, and
then turn on
the appliance
by pressing the
required speed.
●
If the appliance stops
during operation. (P. EN9)
4
When blending is
completed , switch
off by pressing
the "0" button.
Unplug.
Turn the blender
jug anticlockwise
to remove it,
open the cover and take out the
ingredients.
1
2
Unlock
Lock
1
2
3
1
2
3
4
1
Turn the mill container upside
down and place the ingredients
in it. Twist the mill container
base clockwise until you hear a
click sound.
2
Attach the mill container to the
motor housing.
①
Align the △
on the motor
housing
with the ▽
on the mill
container
base.
②
Twist mill container clockwise until
you hear a click sound.
●
Mill container only can be attached by above
steps.
3
Plug in. Hold the
mill container,
and then turn on
the appliance
by pressing the
required speed.
●
If the appliance stops during operation. (P. EN9)
4
When grinding is completed, switch
off by pressing the "0" button.
Unplug. Turn the mill container
anticlockwise to remove it, open
the mill container, and take out
the ingredients.
Unlock
Lock
1
2
1
2
3
4
3
2
1
How to use
■
Blender
To assemble
Turn anticlockwise
400
600
800
1000
1
2
■
Wet & Dry Mill
To assemble
Turn clockwise
1
2
Mill
Gasket
Make sure the gasket is not damaged and placed properly before assemble.
Mill Container
Top
View