Panasonic MJ-CB800, Руководство по эксплуатации, Страница: 10 / 20

EN9
English
1
Troubleshooting
Before calling for service, please check through this section.
Problem Cause and Action
The appliance does not
turn on.
● The blender jug / mill container is not set properly.
➝
Make sure to align the marks on blender jug base / mill container base with motor
housing, then twist it firmly until you hear a "click" sound. (P. EN7)
● The container unit / blender jug base / mill container base is not assembled tightly.
➝
Assemble it tightly. (P. EN7)
● The protection device of overload or overheating is activated.
➝
Refer to "Overload and Overheating Protection" for inspection. (P. EN5)
● The power plug is disconnected.
➝
Insert the power plug into outlet firmly.
Rotation stops
abruptly.
● The protection device of overload or overheating is activated.
➝
Refer to "Overload and Overheating Protection" for inspection. (P. EN5)
There is abnormal
noise or vibration
increases.
● Too much ingredients.
➝
Reduce ingredient amount.
● The container unit / blender jug base / mill container base is not assembled tightly.
➝
Assemble it tightly. (P. EN7)
The texture and
consistency of the
processed ingredients
do not turn out well.
● Some ingredients might be too difficult to process raw, e.g. pumpkin.
➝
Precook might be necessary to soften the ingredients before processing, i.e. until a fork
can easily pierce.
● Ingredient size is not according to the preparation method.
➝
Prepare accordingly to the size stated.
The ingredient is
leaking.
● The blender jug base / mill container base is not assembled tightly.
➝
Assemble it tightly. (P. EN7)
● The blender gasket / mill gasket is not attached or attached loosely.
➝
Attach it properly.
● Foreign matters are stuck around blender gasket / mill gasket.
➝
Remove them.
● The blender gasket / mill gasket is damaged.
➝
Contact Panasonic Service Centre to replace it.
The blade is idling.
●
The liquid amount is not enough.
➝
Add more liquid.
●
Too much ice cubes. (E.g. juice with a lot of ice)
➝
①
Remove blender jug after rotation stops completely.
②
Shake the blender jug gently.
Specifications
Juicer Blender Wet & Dry Mill
Power Supply
220 - 240 V 50 - 60 Hz
Power Consumption
270 - 320 W
Operation Rating
Continuous (Repetition 2 min
ON, then 2 min OFF)
Continuous
(Repetition 3 min ON,
then 1 min OFF)
Continuous
(Repetition 1 min ON,
then 2 min OFF)
Dimension (Approx.)
(W x D x H)
207 x 297 x 384 (mm) 207 x 279 x 406 (mm) 207 x 279 x 299(mm)
Weight (Approx.)
3.6 kg 3.3 kg 2.5 kg
Capacity (approx.)
Juice Cup
:
1.5 L;
Pulp Container
:
2.0 L
1.35 L
Working Capacity: 1.0 L
Working Capacity: 50 g
(coffee beans)