EN5
English
Parts Names and Instructions
Overload and Overheating Protection
In case of overload and overheating, the protection device is triggered to stop operation and it is not abnormal.
After rotation stops, follow the below steps:
●
Do not use the appliance repeatedly without any countermeasure.
1
Turn the rotary switch to “0” position, unplug the appliance.
2
Remove attachment from motor housing. Remove accumulated food residue from the spinner/container cover.
●
Remove the prohibited ingredient if used.
3
Reset the attachment, then start again. (P. EN6)
If the appliance still does not operate after performing the above, overheating protection has been activated.
Turn the rotary switch to “0” position, unplug and rest the appliance for about 15 minutes or more (until motor housing
returns to a normal temperature) to release overheating protection before using again.
(If appliance still does not operate, contact Panasonic Service Centre for inspection or repair.)
* The shape of the power plug may be different from illustration.
●
Illustrations of product in this instructions are exemplified by
MJ-CB100
.
■
Accessory
■
Juicer
2 High speed
1 Low speed
0 OFF
Rotary Switch
Motor Housing
(Material
MJ-CB600: Metal
MJ-CB100: Plastic)
Food Pusher
Feeding Tube
Container Cover
Spinner Pad
Spinner
Container
Spout
Juice Cup
Cup Cover
(Approx. 1.5 L)
Power Plug *
Power Cord
Pulp Container
(Approx. 2.0 L)
Rotary Switch
Container Unit
Clamps (Both sides)
Brush
OI9 JZ50T167_TH_Booklet.indb 5
OI9 JZ50T167_TH_Booklet.indb 5
2023/1/6 21:38:09
2023/1/6 21:38:09
