Panasonic MINAS A6B Series, Технические характеристики, Страница: 105 / 111

No.SX-DSV03335
Cate Pr.
Parameter
Default
value
Cate Pr.
Parameter
Default
value
Cate Pr.
Parameter
Default
value
Cate Pr.
Parameter
Default
value
Cate Pr.
Parameter
Default
value
4 0 SI1 input selection 3289650
4
31
Positioning complete (In-position)
range
10
1 SI2 input selection
8487297
32
Positioning complete (In-position)
output setup
0
2 SI3 input selection
8553090
33 INP hold time
0
3 SI4 input selection
2236962
34 Zero-speed
50
4 SI5 input selection 2105376 35 Speed coincidence range 50
5 SI6 input selection 2171169 36 At-speed (Speed arrival) 1000
6 SI7 input selection 3158064 37
Mechanical brake action at stalling
setup
0
7 SI8 input selection 3223857 38
Mechanical brake action at
running setup
0
8 No use
-
39 Brake release speed setup
30
9 No use
-
40 Selection of alarm output 1
0
10 SO1 output selection
197379
41 Selection of alarm output 2
0
11 SO2 output selection 1052688 42
2nd Positioning complete (In-
position) range
10
12 SO3 output selection 65793 43 No use -
13 No use - 44
Position comparison output pulse
width setting
0
14 No use - 45
Position comparison output
polarity selection
0
15 No use - 46 No use -
16 Type of analog monitor 1
0
47 Pulse output selection
0
17 Analog monitor 1 output gain
0
48 Position comparison value 1
0
18 Type of analog monitor 2 4 49 Position comparison value 2 0
19 Analog monitor 2 output gain 0 50 Position comparison value 3 0
20 No use - 51 Position comparison value 4 0
21 Analog monitor output setup 0 52 Position comparison value 5 0
22 For Manufacturer use 0 53 Position comparison value 6 0
23 For Manufacturer use
0
54 Position comparison value 7
0
24 For Manufacturer use
0
55 Position comparison value 8
0
25 No use - 56
Position comparison output delay
compensation amount
0
26 No use - 57
Position comparison output
assignment setting
0
27 No use -
28 No use -
29 No use -
30 No use
-
5/11
PARAMETER MODEL MINAS-A6B(BL/BM) series
*1 When checking directly value of parameter-file with a text data etc., it does not show the decimal point. Ex) Pr6.24 Load change compensation filter
･･･
Value of Panaterm
：
0.53 / Value of parameter-file
：
53
* Parameter names in the table correspond to the DD motor (rotary type). For parameter names and setting values corresponding to linear motors, refer to the technical document.