Panasonic MC-YL628, Руководство по эксплуатации

Страница: 15 / 20

15
WARNING /
警告
/
คำเตือน
/ CẢNH BÁO
Disconnect the electrical supply before servicing or cleaning the appliance.
Failure to do so could result in electric shock or personal injury from the appliance suddenly starting.
要求服務或清潔產品前，請關上電源。
若未能依循指示操作，突然開啓此產品將造成觸電或個人受傷。
ถอดปลั๊กไฟออกก่อนที่จะทำความสะอาด หรือดูแลรักษาเครื่องดูดฝุ่น
มิเช่นนั้นอาจทำให้เกิดไฟฟ้าช็อต หรือเกิดการบาดเจ็บเมื่อเริ่มใช้เครื่องดูดฝุ่น
Rút điện trước khi bảo trì hoặc làm vệ sinh máy hút bụi.
Nếu không có thể gây điện giật hoặc thương tích cá nhân do máy bất ngờ khởi động.
INSPECTION BEFORE REQUESTING SERVICE
要求服務前
การตรวจสอบก่อนขอรับบริการ
KIỂM TRA TRƯỚC KHI YÊU CẦU DỊCH VỤ
Electrical Shock or Personal Injury Hazard
電擊或個人受傷危險
อันตรายจากการบาดเจ็บหรือไฟฟ้าช็อต
Nguy cơ Điện Giật hoặc Thương tích Cá nhân
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Review this chart to find do-it-yourself solutions for minor performance problems. Any service needed, other than
those described in these Operating Instructions, should be performed by an authorised service representative.
The appliance not operate.
Poor job of dirt pick-up.
The appliance stops during
operation.
1. Unplugged at socket outlet.
1. Full or clogged Dust Box.
2. Clogged Nozzle.
3. Clogged Hose.
4. Hose not inserted fully.
5. Dirty Filters.
1. Full or clogged Dust Box.
2. Clogged Nozzle.
3. Clogged Hose.
4. Thermal protector tripped.
1. Plug in firmly, turn on the appliance.
1. Empty the Dust Box.
2. Check for clogs.
3. Check for clogs.
4. Check Hose connection.
5. Clean all the Filter.
1. Empty the Dust Box.
2. Check for clogs.
3. Check for clogs.
4. Unplug the appliance, allow to cool and thermal
protector will reset itself (Wait about 60 minutes).
症狀 可能的原因 解决方法
檢閲此下表並找出自行排解的方法，以解決較輕微的技術問題。
除了已經詳述的操作説明外，若需要任何的服務，都必須經由授權的服務代表處理。
此產品不轉動。
污垢不能吸起
運轉中此產品停轉。
1.
插頭没有插電。
1.
將集塵箱盛滿或堵塞。
2.
吸嘴堵塞。
3.
吸塵管堵塞。
4.
吸塵管没有完全插穩。
5.
濾網骯髒。
1.
將集塵箱盛滿或堵塞。
2.
吸塵嘴堵塞。
3.
吸塵管堵塞。
4.
溫度保護器傾翻。
1.
穩固的插上插頭，開啓此產品。
1.
清空將集塵箱。
2.
檢查堵塞。
3.
檢查堵塞。
4.
檢查吸塵管連接。
5.
清理全部濾網。
1.
清空將集塵箱。
2.
檢查堵塞。
3.
檢查堵塞。
4.
拔下此產品的插頭并讓它冷却。
溫度保護器將自行重新設定（等大約
60
分鐘）。