Panasonic MC-UL710-WP47, Руководство по обслуживанию

Страница: 15 / 22

15
5. Return the Nozzle so that the front is up, and remove the
Floor Nozzle Upper Assy.
*When separating, be careful not to cause whitening
or damage of the tab fitting hooks of the Floor Nozzle
Upper Assy.
4.8. Removal of the Nozzle Motor
Unit
1. Remove the connector of the Nozzle Motor Unit that is
inserted in the P.C.B. E Unit, then remove the Nozzle
Motor Unit and the Belt.
*When assembling, be sure to place the lead wires in
their original positions. (See the wiring diagram)
4.9. Removal of the Nozzle Wand
Unit
1. Remove the connector of the Nozzle Wand Unit that is
inserted in the P.C.B. E Unit, then remove the Nozzle
Wand Unit.
*When assembling, be sure to place the lead wires in
their original positions. (See the wiring diagram)
4.10. Removal of the Lead Wire G
Unit
1. Remove the connector of the Lead Wire G Unit that is
inserted in the P.C.B. E Unit, then remove the Lead Wire
G Unit and the Switch Support.
*When assembling, be sure to place the lead wires in
their original positions. (See the wiring diagram)