Panasonic MC-UL710-WP47, Руководство по обслуживанию

Страница: 10 / 22

10
4. Peel off Gasket S and the Packing U, then use a flathead
screwdriver to release the two Tab Portions between the
Motor Case Set and the Curved Pipe Unit.
5. Remove the Curved Pipe Unit, Motor Case Set, Motor
Support Rubber (Front), and the Motor Support Rubber
Unit (Rear).
6. Remove the Faston terminal of the Fan Motor Unit, and
then remove the Noise Suppressor Unit.
*Hold down the lock and remove.
*After attaching the Faston terminal, wrap with
Gasket V.
*When assembling, place the capacitor, thermal protector, and wire connector of the various lead wires in their origi-
nal positions.
*After engaging the Motor Case Set and the Curved Pipe Unit, stick Gasket S and the Packing U in their original posi-
tions. (If they cannot be reused, replace them.)