Panasonic MC-SB30J, Руководство по эксплуатации

Страница: 30 / 40

EN10
When the dust bin is full
or the suction power is
weakened, please clean up the
rubbish in time and perform
maintenance.
Maintenance Maintenance

Turn off the vacuum cleaner when cleaning up
rubbish or during maintenance.
1
Hold the handle to remove the pleat filter
2
Press and hold the button to remove the
mesh filter
3 Clean up the rubbish
Press the dust bin release button to remove the
dust bin (as shown)
Clean up the rubbish
2
Remove the
dust bin dust bin
1
Dust bin Dust bin


Pleat filter
• When opening the dust bin, please do not
place it as shown in the fi gure, so as to
prevent the garbage from leaking when the
suction inlet faces downward.
Suction inlet
Exhaust vent
Face the suction
inlet upwards
Button

When the dust sensor lamp and the battery level lamp fl ash at the
same time (In this case, the suction power is weakened), please
timely clean up the rubbish and perform maintenance.

In order to prevent the suction power from dropping, rubbish that
easily clogs such as sand should be removed as soon as possible
even if the amount is small, and the dust bin should be maintained.

The dust bin may become full earlier on new carpets because of
the presence of loose threads.
Note Note