Panasonic MC-SB30J, Руководство по эксплуатации

Страница: 35 / 40

EN15
T
ro
ub
le
sh
oo
tin
g
Troubleshooting
When this happens When this happens Inspection and handling Inspection and handling
O
pe
ra
tio
n·
Operation·
S
uc
tio
n p
ow
er
Suction power
The idling OFF function
is disabled

Is the idling OFF function disabled? (P. EN8, EN16)

Is there any dirt or dust on the sensor?
→Perform maintenance (P. EN12)
S
m
ell
s
Smells
The exhaust smells of
rubbish

Has the vacuum cleaner not been cleaned after inhaling smelly rubbish?
→If you care about the odor during the re-operation, please remove the rubbish
and perform maintenance (P. EN10 ~ EN11)
S
ou
nd
s
Sounds
A click sound is heard
when shaking the nozzle

Is the dust bin installed correctly? (P. EN10 ~ EN11)
During vacuuming, the
operating sound changes

In the automatic mode, the vacuum cleaner automatically adjusts the suction
power according to the amount of the rubbish and causes the operating sound
to fl uctuate. It is not abnormal.

Are the extension wand, nozzle, dust bin, pre fi lter blocked?
→Perform maintenance (P. EN10 ~ EN13)
At startup, the body may
emit a “beep
”
sound (the
vacuum cleaner cannot
run at this time)

Please run again.
D
us
t s
en
so
r la
m
p
Dust sensor lamp
The dust sensor lamp
fl ashes slowly
(approximately fl ash once
every 3 seconds)

Is it at idling OFF?
In the idling OFF mode, the dust sensor lamp fl ashes slowly. (P. EN8)
Lamps light even though
no dust has been sucked
(lamps do not go off)

Is there dust on the dust sensor lamp?
→Wipe the rubbish, dust, etc. attached to the sensor with a soft, dry cloth
(P. EN12) Lamps don’t light even
though dust has been
sucked
D
us
t s
en
so
r la
m
p
Dust sensor lamp
Lamps don’t seem to go
off

In the following cases, the dust sensor lamp may stay lit and will not go out. It is
not abnormal.
• When vacuuming a carpet, etc. (because of the loose fuzz of it)
• When vacuuming bedding such as quilts, blankets, etc. (There may be much
keratin, dander, mite, etc.)
→After vacuuming, debris such as loose fuzz, keratin, dander, mite, etc. will
gradually decrease, and the lamp will slowly extinguish
You can also set the sensitivity of the sensor to [Easy]
O
th
er
s
Others
Dust sensor lamp, battery
level lamp fl ashing at the
same time

If the lamps are turned on at the same time, the temperature is abnormal.
→Wait 5 to 30 minutes

When they fl ash at the same time, the dust bin, nozzle, and extension wand
may be blocked.
→Remove obstructions (P. EN10 ~ EN13)
If there is still a problem
after checking

Do not repair yourself, and please take this product (body, extension wand, fl oor
nozzle, battery charger etc.), together with product warranty registration card to
the original purchase store.

Please consult with the original dealer.